Relationship between perceptual and mechanical markers of fatigue during bench press and bench pull exercises: impact of inter-set rest period length.

This study aimed to explore whether the relationship between perceptual (rating of perceived exertion; RPE) and mechanical (maximal number of repetitions completed [MNR], fastest set velocity, and mean velocity decline) variables is affected by the length of inter-set rest periods during resistance training sets not leading to failure. Twenty-three physically active individuals (15 men and eight women) randomly completed 12 testing sessions resulting from the combination of two exercises (bench press and bench pull), three inter-set rest protocols (1, 3, and 5 min), and two minimal velocity thresholds (farther from muscular failure [MVT0.45 for bench press and MVT0.65 for bench pull] and closer to muscular failure [MVT0.35 for bench press and MVT0.55 for bench pull]). The duration of inter-set rest periods did not have a significant impact on RPE values (p ranged from 0.061 to 0.951). Higher proximities to failure, indicated by lower MVTs, were associated with increased RPE values (p < 0.05 in 19 out of 24 comparisons). Moreover, as the number of sets increased, an upward trend in RPE values was observed (p < 0.05 in seven out of 12 comparisons). Finally, while acknowledging some inconsistencies, it was generally observed that higher magnitudes of the mechanical variables, especially MNR (rs < -0.55 in three out of four comparisons), were associated with lower RPE values. These results, which were comparable for the bench press and bench pull exercises, suggest that post-set RPE values are affected by the fatigue experienced at both the beginning and end of the set.

Test-Retest Reliability of 3 Specific Strength Tests in Professional Handball Players.

CONTEXT: Current devices to assess strength performance in handball may not be sufficiently sports-specific and reliable methods. Functional electromechanical dynamometry is a new technology that allows the development of accurate strength tests in athletes. PURPOSE: To determine the absolute and relative reliability and to compare the reliability of the right and left side, and mean and peak force of 3 specific strength tests in handball players with a functional electromechanical dynamometer: unilateral pullover, standing lift, and step forward. METHODS: Fourteen male handball players of the first Spanish division (28.79 [4.81] y; 10.38 [4.63] y of professional experience) performed a repeated-measurement design. Three testing sessions were performed (one per week). The first measurement consisted of 4 isometric tests (right and left unilateral pullover, and right and left standing lift) to obtain isometric peak force, and in the second and third sessions, 6 incremental tests until failure (right and left unilateral pullover, and right and left standing lift, right and left step forward) were performed. RESULTS: The tests provided high reliability or acceptable reliability for mean and peak strength of unilateral pullover, standing lift and step forward (intraclass correlation coefficient = .83-.97; coefficient of variation = 3.90-11.57). Effect side was negligible in any of the parameters, except for a small effect side in the left peak force for unilateral pullover and a small effect side on the left side for a step forward. Significant differences in reliability (coefficient of variation ratio > 1.15) were found between the right and left sides and peak and mean force in all exercises except peak force in unilateral pullover and step forward. CONCLUSION: These results confirm that the tests could be applied to assess physical performance in handball at the same time as regular gym training. Moreover, this is an excellent opportunity to individualize the player's weekly load.

Does the Menstrual Cycle Impact the Maximal Neuromuscular Capacities of Women? An Analysis Before and After a Graded Treadmill Test to Exhaustion.

ABSTRACT: Morenas-Aguilar, MD, Ruiz-Alias, SA, Blanco, AM, Lago-Fuentes, C, García-Pinillos, F, and Pérez-Castilla, A. Does the menstrual cycle impact the maximal neuromuscular capacities of women? An analysis before and after a graded treadmill test to exhaustion. J Strength Cond Res 37(11): 2185-2191, 2023. This study explored the effect of the menstrual cycle (MC) on the maximal neuromuscular capacities of the lower-body muscles obtained before and after a graded exercise test conducted on a treadmill to exhaustion. Sixteen physically active women were tested at -11 ± 3, -5 ± 3, and 5 ± 3 days from the luteinizing peak for the early follicular, late follicular, and midluteal phases. In each session, the individualized load-velocity (L-V) relationship variables (load-axis intercept [L0], velocity-axis intercept [v0], and area under the L-V relationship line [Aline]) were obtained before and after a graded exercise test conducted on a treadmill to exhaustion using the 2-point method (3 countermovement jumps with a 0.5-kg barbell and 2 back squats against a load linked to a mean velocity of 0.55 m·second-1). At the beginning of each session, no significant differences were reported for L0 (p = 0.726; ES ≤ 0.18), v0 (p = 0.202; ES ≤ 0.37), and Aline (p = 0.429; ES ≤ 0.30) between the phases. The MC phase × time interaction did not reach statistical significance for any L-V relationship variable (p ≥ 0.073). A significant main effect of "time" was observed for L0 (p < 0.001; ES = -0.77) and Aline (p = 0.002; ES = -0.59) but not for v0 (p = 0.487; ES = 0.12). These data suggest that the lower-body maximal neuromuscular capacities obtained before and after a graded treadmill test are not significantly affected by MC, although there is a high variability in the individual response.

Strength Assessment of Trunk Rotator Muscles: A Multicenter Reliability Study.

BACKGROUND: Trunk rotator strength plays an important role in sports performance and health. A reliable method to assess these muscles with functional electromechanical dynamometer has not been described. Therefore, the objectives of this paper were (I) to explore the reliability of different strength variables collected in isokinetic and isometric conditions during two trunk rotator exercises, and (II) to determine the relationship of isometric and dynamic strength variables collected in the same exercise. METHODS: A repeated measures design was performed to evaluate the reliability of the horizontal cable woodchop (HCW) and low cable woodchop (LCW) exercises. Reliability was assessed using t-tests of paired samples for the effect size, the standard error of measurement, the coefficient of variation (CV) and the intraclass correlation coefficient (ICC). The Pearson's (r) correlation coefficient was used to explore the association between isometric and isokinetic tests. RESULTS: HCW exercise is more reliable than LCW exercise in assessing trunk rotator muscles. The strength manifestation that should be used is the average strength, and the most reliable evaluation was the HCW at 0.40 m·s-1 concentric (ICC = 0.89; CV = 10.21%) and eccentric (ICC = 0.85; CV = 9.33%) contraction and the dynamic condition that most correlated with the isometric was LWC at 0.50 m·s-1 (r = 0.83; p < 0.01). CONCLUSION: HCW is a reliable exercise to measure trunk rotator muscles.

Males Have a Higher Energy Expenditure than Females during Squat Training.

The main objective of this study was to determine the differences in energy expenditure (EE) according to sex during and after two different squat training protocols in a group of healthy young adults. Twenty-nine Sports Sciences students volunteered to participate in this study. They attended the laboratory on four different days and completed four sessions: two sessions with 3 sets of 12 repetitions at 75% of their one-repetition maximum (RM) and two sessions with 3 sets of 30 repetitions at 50% of their 1RM. Energy expenditure was evaluated using an indirect calorimeter. Males consistently demonstrated higher EE in all sessions and intensities. The linear regression model identified a significant association between sex, BMI, and total EE across all sessions and intensities. In conclusion, males exhibited higher EE in both protocols (50% and 75% of 1RM) throughout all sessions. Furthermore, sex and BMI were found to influence EE in healthy young adults. Therefore, coaches should consider sex when assessing EE, as the metabolic response differs between males and females.

Effect of a High-Intensity Handball-Specific Fatigue Protocol Focused on the Leg Contralateral to the Throwing Arm on Interlimb Asymmetries.

ABSTRACT: Janicijevic, D, Pérez-Castilla, A, Miras-Moreno, S, Ortega-Becerra, M, Morenas-Aguilar, MD, Smajla, D, Sarabon, N, and García-Ramos, A. Effect of a high-intensity handball-specific fatigue protocol focused on the leg contralateral to the throwing arm on interlimb asymmetries. J Strength Cond Res 37(7): 1382-1389, 2023-This study aimed to elucidate which countermovement jump (CMJ) variant (unilateral or bilateral) is more sensitive to detect the decrement in kinetic CMJ-derived variables of the leg more actively involved in a handball-specific fatigue protocol. Seventeen female handball players (age: 20.6 ± 2.5 years) performed a fatigue protocol consisting of 8 repetitions of the following circuit separated by 10 seconds: 10 m sprint, 180° change of direction with the leg contralateral to the throwing arm, 10 m sprint with ball reception at 7 m, and handball throw preceded by a jump over a 40 cm hurdle with the leg contralateral to the throwing arm. Before and after the fatigue protocol, 6 unilateral CMJs (3 with each leg) and 3 bilateral CMJs were performed on a dual Kistler force platform (model 9260AA6). Bilateral CMJ height was reduced by 5.4% after the fatigue protocol (p < 0.001). However, the fatigue protocol did not promote any significant change in peak force, mean force, and propulsive impulse or in their asymmetry values (17 of 18 comparisons). The decrement of 6.1% during the unilateral CMJ in the propulsive impulse developed by the leg ipsilateral to the throwing arm (less involved in the fatigue protocol) was the only variable that reached statistical significance (p = 0.038). The pre-post fatigue changes in asymmetry values presented negligible correlations between both CMJ variants (rs = 0.01 to -0.19). These results suggest that neither unilateral nor bilateral CMJs are able to detect changes in interlimb asymmetries after a high-intensity handball-specific fatigue protocol.

Test-Retest Reliability of the Functional Electromechanical Dynamometer for Squat Exercise.

BACKGROUND: the main objective of this study was to evaluate the test-retest reliability of two different functional electromechanical dynamometry (FEMD)-controlled squat training protocols. METHODS: twenty-eight healthy young adults volunteered to participate in this study. They attended the laboratory on four different days and performed four sessions: two of three sets of 12 repetitions at 75% 1RM and two of three sets of 30 repetitions at 50% 1RM. The range of movement (ROM), mean dynamic strength (MDS), peak dynamic strength (PDS), mean velocity (MV), peak velocity (PV), mean potency (MP), peak potency (PP), work (W), and impulse (I) were recorded. To evaluate the reliability of FEMD, the intraclass correlation coefficient (ICC), standard error of measurement (SEM), and coefficient of variation (CV) were obtained. RESULTS: reliability was very high for ROM (CV: 3.72%, ICC: 0.95), MDS (CV: 1.09%, ICC: 1.00), PDS (CV: 1.97%, ICC: 1.00), and W (CV: 4.69%, ICC: 1.00) conditions at 50% 1RM and for ROM (CV: 3.90%, ICC: 0.95), MDS (CV: 0.52, ICC: 1.00), PDS (CV: 1.49%, ICC: 0.98), and W (CV: 4.14%, ICC: 1.00) conditions at 75% 1RM and high for the rest of variables at 50 and 75% 1RM. CONCLUSIONS: this study demonstrates that FEMD is a reliable instrument to measure ROM, MDS, PDS, MV, PV, PV, MP, MP, W, and I during both squat protocols (50 and 75% 1RM) in healthy young adults.

Optimizing mechanical performance in the bench press: The combined influence of inter-set rest periods and proximity to failure.

This study examined the influence of inter-set rest periods of 1 (R1), 3 (R3) and 5 (R5) minutes on the number of repetitions completed before exceeding the minimum velocity thresholds of 0.45 m⋅s-1 (MVT0.45) and 0.35 m⋅s-1 (MVT0.35) during the bench press exercise. Twenty-three physically active individuals, 15 men and eight women, randomly completed six testing sessions consisting of four sets of the bench press exercise performed with maximal intent against 75% of the one-repetition maximum. Testing sessions differed in the length of inter-set rest periods (R1, R3, and R5) and MVT applied (MVT0.45 and MVT0.35). The number of repetitions was lower using shorter inter-set rest periods (R1 < R3 < R5), but R3 was more similar to R1 and R5 using MVT0.45 and MVT0.35, respectively. The fastest velocity of the set was reduced with the increment in the number of sets for the three protocols using MVT0.35 (greater reduction for shorter rest periods), but it was only reduced for R1 when using MVT0.45. The results suggest that, to maintain bench press mechanical performance, 5-min inter-set rest periods are necessary when sets are terminated close to failure (MVT0.35), while 3 min may suffice when sets are terminated farther from failure (MVT0.45).